Print PDF
Favorite
Email
Step 4Make Some Nifty DT Fins
To make the fins, tear off a piece of DT about half the length of your rocket.
Fold it in half lengthwise, but don't let the outside edges touch. Push those edges against the bottom of the rocket. It will take practice, but once your get your own trick to it, they go a lot easier.
don't worry if it isn't perfect, as the fins don't make that much of a difference on the smaller rockets.
Trim your fins to shape, whatever you think looks good.
note: I drew some lines on the pipe to help me space my fins out.
Fold it in half lengthwise, but don't let the outside edges touch. Push those edges against the bottom of the rocket. It will take practice, but once your get your own trick to it, they go a lot easier.
don't worry if it isn't perfect, as the fins don't make that much of a difference on the smaller rockets.
Trim your fins to shape, whatever you think looks good.
note: I drew some lines on the pipe to help me space my fins out.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
