Instructables
Picture of Duct Tape Shoes
This Instructable will show you how to make duct tape shoes.

This is my first instructable so please give me ideas on how to make my next one better:)

Step 1: Get your materials

For duct tape shoes, you will need...
~Duct Tape
~Cardboard
~Scissors
~A Pen
~Flip flops or shoes that fit you

Step 2: Trace Flip flop or shoe

Picture of Trace Flip flop or shoe
DSCN8213.JPG
Trace the flip flop or shoe onto the card board
make sure to trace both flip flops/ shoes or else you will have two of the same feet

Step 4: Cover the cardboard

cover the cardboard wit tape, make sure that the tape goes all the way over the cardboard, you will just cut it off to make it look better

Step 10: Do the next shoe

You are done with the first shoe now so follow steps 4-9 to make the other shoe

Step 11: Put more duct tape on the sole

Picture of put more duct tape on the sole
DSCN8242.JPG
The bottom of your shoe should be really messed up, so put duct tape on the bottom to make bottom less sticky

Step 12: YOU'RE DONE!!!!!

Picture of YOU'RE DONE!!!!!
you're done now, so go and show off your new shoes!!!!
 
Remove these adsRemove these ads by Signing Up
catscanrv5 years ago
I think it worked better when I used a marker to trace your shoes. When I used a pen it just poked hole into the cardboard.
If that happens, you're just pressing too hard. Either that or that cardboard is really thin.
I think this was really creative to use the flipflops to trace this shoes