Print PDF
Favorite
Email
Step 2The Taping.
Begin the taping process by starting on the back edges of the boat.
Then using the buddy system tape across the boat horizontally by handing the tape across the body of the boat.
Make sure to over lap the tape about 1/2 of an inch to create the water proof shell.
Then after you have gone up the entire length of the boat repeat the process coing lengthwise down the boat and repeat until you are out of tape.
After you are done sprinkle some powdered flour on the inside of the boat to get rid of any sticky factor that you find annoying.
Then using the buddy system tape across the boat horizontally by handing the tape across the body of the boat.
Make sure to over lap the tape about 1/2 of an inch to create the water proof shell.
Then after you have gone up the entire length of the boat repeat the process coing lengthwise down the boat and repeat until you are out of tape.
After you are done sprinkle some powdered flour on the inside of the boat to get rid of any sticky factor that you find annoying.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Sep 23, 2010. 10:55 AMQuester55
says:
F Y I Another source for fantastic Duck-Tape would by [ AS&S ] that's American Science Surplus.com, They have a sale on 12" wide rolls of Duck-Tape.
Reply
1
Sep 23, 2010. 6:25 PMlselse3 (author)
says:
that is amazing thank you very much that seems like what i needed in the first place!
Reply
 |
Add Comment
|
![duct tape boat [transparent]](http://img.instructables.com/files/deriv/FFN/CDZF/GOIDH5JR/FFNCDZFGOIDH5JR.SQUARE.jpg)
