Print PDF
Favorite
Email
Step 3Testing
Carefully launch the boat as not to rip any tape.
Remember to check for any dangers to the boat or you before launching.
Side Notes:
This model holds three people and small cooler in the hollow nose of the craft
There are no pictures of this but i recently added a gorilla tape shell to the bottom, up the sides
About 6 inches and on the botom of the nose. this "stick proofed" the craft and it can take a hit From sticks at moderate speed ( ie like 3 mph havent tried faster)
With one person and a 55lb. thrust trolling motor we clocked it at 5 -6 mph.
Remember to check for any dangers to the boat or you before launching.
Side Notes:
This model holds three people and small cooler in the hollow nose of the craft
There are no pictures of this but i recently added a gorilla tape shell to the bottom, up the sides
About 6 inches and on the botom of the nose. this "stick proofed" the craft and it can take a hit From sticks at moderate speed ( ie like 3 mph havent tried faster)
With one person and a 55lb. thrust trolling motor we clocked it at 5 -6 mph.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Nov 6, 2010. 8:52 PMFieldingBlue
says:
I am so impressed. What a brilliant project.
Reply
 |
Add Comment
|
![duct tape boat [transparent]](http://img.instructables.com/files/deriv/FFN/CDZF/GOIDH5JR/FFNCDZFGOIDH5JR.SQUARE.jpg)
