UPDATE! I added a little spot for my Blutooth dongle I bought. I don't have instructions right now, but you just add a smaller pocket in between the bigger pockets.
Step 1: Materials
-tape measure or ruler(handy, but optional)
-and, of coarse, usb sticks/thumb drives! (fun stuff)
Step 2: Make one big slab-o-duct tape! :)
-First, pull two foot long duct tape pieces from the role,cut em, and lay them side by side on the table(fig #1 & #2).
-Then, pull another strip of duct tape about 2 inches longer than the other two duct tapes(the extra length will hold the slab in place for now), and lay it on the other two duct tapes(fig #3 & #4).
-After, cut one more foot long piece, cut it in half all the way down, and place each piece over one of the ends(fig #5, #6 & #7).
-Lastly, lift it from the table, and trim all the edges(you can throw the clippings away, unless you want to keep them :P) (fig #8 & #9).