"Dummy Grenade"

Play airsoft, paintball or even dart tag? well if you need a grenade this is the instructable for you I've made about 10 of these so far you can use pepper shakers salt shakers aspirin bottles even fish food cans take a look give comments and hang out with fellow airsoft players HENCE i am in a professional airsoft team T.A.S.G= tactical airsoft group and S.C.A.R=Sussex county airsoft regiment

Step 1: The body

Ok first start by taking the lid off the container take a screwdriver,knife or any thing like that and poke a hole dead center of the lid but be careful

Comments

[create#1]

how do you use it it does not even explode all it has is a ring on a container can you at least explain how you use it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Derek Vigil]

A dummy grenade is a prop or just for decoration. Real dummy grenades are used in the military to practice.

[kaynegabe]

What's the spoon for?

[footer0]

Its not a real spoon. On a live grenade it is essentially a safety, it keeps it from going off in your hand ( hopefully). It called a spoon because of it querky shape.

[kaynegabe]

Oh okay, but how does it stop it from going off in your hand?

[Blacksmith Spader]

by holding the spoon down it prevents the catalyst component in the head of the grenade from mixing with the active compound inside the body which initiates the 5-8 second delay for the chemicals to interact. Therefore as long as you long down the spoon, you can put the pin back in the grenade without it going off. However, if you release the handle it begins to "cook" and the time before either your launch of explosive or your imminent doom.

[knex_mepalm]

to explain that, it means it stop it going off as long as you are holding it

[footer0]

It keeps the primer from being struck.

[rhys25690811234]

awesome I'm part of the T.A.S.G too

[prop master]

yeah can you exsplain how to use it like how it sends bb every where becaus im confused

[sam1997]

hmmm...can you pull the pin out?
(would it be possable to use a "D" siz battery as the body?

[sam1997]

i have 7 of them now, but i havnt told my friends. wenevr there in a buker in teh next airsoft war, im gonna throw in like four XD

[John_234]

You can buy a replica or dummy for less then $10 at most places. You can even buy an airsoft friendly rubber nade for 5 bucks This might be a good idea if you put a sonics grenade or something inside.

[footer0]

No, I just got some real grenades from my family. Alot of my family is in the military. De-Activated of course.

[franklinonline]

 defused or with all the explosive stuff taken out

[Colonel88]

wait is sussex county in NJ?

[footer0]

Yes, why?

[fbic12345]

What the heck are you trying to tell us?
The wording was terrible     :o  '  '
                                                       <>

[jake the bom]

OMG that was so amazing!! nice work!

[Airsoft_Maniac_96]

I think a good way you should make a grenade is by using a firecracker and a plastic grenade bb holder. if you cut the bb holder in half so the grenade will work like those easter egg grenades but instead its a grenade shape just put the fuse were the pin would go then make one of those pull tab things for grenades people make :)

[knex_mepalm]

how about this, a container with some explosives and bbs, you strike the match when you pull of the pin and it slowly ights the explosive and you throw it sending a shower of bss

[mnb]

COOL !!!!!!!!!!!!!!!

[footer0]

Sarcastic enough?

[1spartan95]

poke a few holes and house a smoke nade in there

[chinese basterd]

could u show some pictures of what it looks like when its done

[ethanbkr]

wtf no explosives?! what kind of grenade is this. lol

[footer0]

One that people like you won't kill your selves with.

[ethanbkr]

not powerful compounds but enough to propel paint packets like 30 feet

[footer0]

They make paintball airsoft BBs which work fine.

[shot789]

You should make it so when you pull the pin the handle comes off and put a hole in the container and you have a bb holder.

[spencer42]

That is just the case.

[jmanjman]

Hey! I want to make one that works! do you think you could do that!?HUH!?HUH!?HUUUUHHHH!?!?

[footer0]

You forgot the magic words.

[jmanjman]

Please!!!! and thank you if you can!

[adamthiede]

cool. Good job! 5 stars. COMMENT

[footer0]

Sarcasm?

[DABESTINTHEWEST]

i cant buy a dummy nade because i spent all my money on my tm psg 1 so i was wondering what you used more in detail.( what is the bottom part of the nade made of, the part with the holes. what is the pin attached to. what did you make the top lever out of) thanks.

[John_234]

uh, dude......you can buy a dummy nade for $5

[pyromaniac2]

*COMMENT*

[footer0]

Someone may enjoy being stabbed in the trachea?