Print PDF
Favorite
Email
Step 2Illuminate the LEDs
Clip the leads from the LEDs so they are about half of their original length.
Attach the LED to the battery with a small piece of duct tape. Each LED / battery combo will undergo a ton of abuse so make sure that they are connected very securely.
To test: Violently throw the illuminated LEDs at walls and other hard surfaces to see if they flicker at all. If they do, reconnect the LEDs to the batteries, and try again.
Attach the LED to the battery with a small piece of duct tape. Each LED / battery combo will undergo a ton of abuse so make sure that they are connected very securely.
To test: Violently throw the illuminated LEDs at walls and other hard surfaces to see if they flicker at all. If they do, reconnect the LEDs to the batteries, and try again.
| « Previous Step | Download PDFView All Steps | Next Step » |
Thats the beauty of it.