Introduction: E-z Airsoft Machine Gun
Step 1: The Materials
You will need
- one small medicine bottle
- a pen
- a drill w/ a 5/8 bit
Step 2: Main Body
Take the small medicine bottle (empty of all medicine of course) and drill two 5/8 inch holes in the top and side
Step 3: The Barrel
Use the pen and take out all the innards until left with a barrel. Don't use your favorite pen
Step 4: Final Completion
Shove the pen housing barrel into the top of the medicine bottle body. If desired, but this is not required hot glue the barrel in its hole.
Step 5: LOAD AND FIRE
First open the medicine bottle. Next fill the medicine bottle with airsoft bbs. Then screw cap back on and point the barrel towards target. Blow into the hole on the side of the bottle. Troubleshooting may be required to fire at max speed or velocity.
We have a be nice policy.
Please be positive and constructive.