Print PDF
Favorite
Email
Step 3Valves & Venting
I cut a thin strip upwards on the outer wall piece of urethane, and a circle negative for the valve base.
I cut the valve out of the too-narrow-to-be-useful end of the kite bladder.
I put a sock between the sheets to keep the leg from bonding shut while I ironed.
I cut the valve out of the too-narrow-to-be-useful end of the kite bladder.
I put a sock between the sheets to keep the leg from bonding shut while I ironed.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
