Instructables
A simple fabric bucket that has been designed to be rigid enough to stand on its own, yet pliable enough to be folded for easy storage.

The use of heavy-weight fabrics, rather than paper-like interfacing, allows for great recovery even after folding/storage.

Etsy Sew Useful Listing

http://www.etsy.com/view_listing.php?listing_id=6215452
 
Remove these adsRemove these ads by Signing Up

Step 1: Recommended Fabrics

Duck, heavy twill, drill, canvas, denim

Step 2: Material List

Choose 2 coordinating fabrics at least 45" wide.
Fabric #1 3/4 yard
Fabric #2 1/3 yard
Buttons, 2 or 3 or 4. Vintage or new. Matched or not.

Step 3: The Pattern

Picture of The Pattern
(Top to bottom in photo)
Lining. 29.25" x 9.0" Cut 1
Shell A. 29.25" x 6.5" Cut 1*
Shell B. 29.25" x 3.5" Cut 1
Handle. 24" x 2.5" Cut 2
Base. 9" diameter Cut 2 (trace a pie plate or dig out that compass)
Note: Lining, handle, base, and Shell B are all the same fabric. The only contrasting fabric I use is for Shell A.
*modifications for Shell A. If you opt for a light or medium decorative fabric, interface with a layer of duck. I recommend sewing/basting decorative fabric to duck, rather than an iron-on interface. It provides an easy and informal look to the bucket. It also minimzes fold lines later after bucket has been stored.

Step 4: Assembly; Shell

Handle:
~1/4 inch seam allowance.
~Sew right sides together,leave one end open, turn, topstitch. I personally prefer to do the button holes last only because I generally can't pick buttons before hand.
Shell:
~1/2 inch seam allowance.
~Fold Shell A in half length-wise and sew right sides together, press open seams.
~Repeat for Shell B.
~Face (right side to right side) Shell A & B making sure that seams line up. (photo #1)
~Insert unfinished end of strap between both shell pieces assuring that it's centered.(photo #1)
~Sew together. 1/2" seam allowance. (photo #2)
~Unfold and press seams flat (photo #3)
~Topstich (photo #4)
786Ayesha8 months ago
Nice project.like it very much
Cool :) I've started using reusable bags for grocery shopping and I feel bad for the baggers when they won't stay open. I've been on a 'recycle with denim jeans' kick so will try a blue jeans version... ASAP!
I agree! I am learning new sewing techniques and developing some of my own. I've considered using an old coat hanger sewn into the rim... will bend into keep closed, bend out to open. We might want to use coated hangers, though, for while washing they might rust. What do you think?
I REALLY love this bag and hope to make one soon. I have an Etsy shop and sell bags there. I like to use recycled materials. Do you think it would stand nice and stiff if I interface it with denim? Vicki
frogangel5 years ago
Thank you so much for the instructions, It will come handy.
Dalya6 years ago
This is awesome. I love this idea. When I saw this tut I thought I was gonna need some flexible plastic or something like that. But it's just a circular pattern :D Beautiful choice of fabrics and I love the buttons.
mycroftxxx7 years ago
What changes would need to be made to convert this into a foldable "survival" bucket that can hold and transport water?
Maybe use Goretex like fabric- and use seam sealant to waterproof your stitches. Or if you were wanting to go the old fashioned way I believe they used canvas or tightly woven hemp burlap (modern burlap is not close, but you could "reweave it" to be tighter) and it was waterproofed with pitch. Heat the pitch in a can wired to a stick, over the fire. smooth it onto/into the fabric with a hot rock while wearing thick gloves. It flows into the fibers well then cools to a pliable, water proof barrier. When rolling or folding up we stored our dishtowels and washcloths in it so it didn't stick to itself.
Three things I can think of right off: Line the bucket with a plastic grocery bag Oil the fabric with linseed oil to make old fashioned oilcloth Make the bucket from modern vinyl oilcloth
woolfood (author)  mycroftxxx7 years ago
I'm not certain but just speculating..... A self healing fabric, maybe a neoprene of some sort for avoiding leaking through stitch holes. I know that 'back in the day' canvas was used to transport water at least for short distances. But I think it was heavier grade than I've used or at least heavier than I'm willing to put through my machine. A vintage machine could handle that sort of weight. Another line of thinking....I used to cloth diaper my children and I used wool as a moisture repellent. You could try to make the bag in a wool flannel and then felt it up when it's done. That would minimize wicking through stitch holes. I'd definately raise the walls several inches, just to maximize volume. Katie
mymsie7 years ago
Thanks for this awesome tutorial! The instructions are so clear and the photos are very helpful. Such a clever pattern. Here's my first try.
Lucky Bear7 years ago
Thanks so much for this! I made one yesterday! Mine isn't quite as rigid as yours looks, although I used heavy cotton curtain fabric...perhaps I will use a heavier fabric B next time, as I just used dress material for that bit. Anyway, a really sweet design, just wanted to say thanx so much because I love it!
jkluit7 years ago
I cannot believe it! I made virtually the same thing, same fabric et al for teacher's gifts this past May. I did ribbon handles with grommets but it is nearly identical. How crazy is that. Oh, I also stitched coordinating pockets to the outside and filled them with summer goodies, like flip flops, bubbles, journals etc. How interesting.
jrodehickey7 years ago
I've been looking for a grocery tote that will stand up on its own.
SoftAscent7 years ago
Great instructable. I'm going to try this out.
trinit7 years ago
I has a bucket.
mrmath7 years ago
You've got some Mad Sewing Skillz there!