Introduction: EASY BATMAN SPOTLIGHT

Picture of EASY BATMAN SPOTLIGHT

HI this is my first instructable.Im going to make an easy batman spotlight

Step 1: THINGS YOU WILL NEED

Picture of THINGS YOU WILL NEED

THINGS
1.An old pringle can
2.Some wire
3.LED light
4.Tape or Glue

Step 2:

Picture of

CUT THE CAN ABOUT 9CM LENGTH
PRINT THE BATMAN LOGO
CUT IT
PASTE IT IN THE CAN COVER

Step 3:

Picture of

STICK AND CONNECT THE LED INSIDE THE CAN
PUT THE COVER ON TOP OF IT

Step 4:

Picture of

CONNECT TO BATTERY OR COMPUTER
IT LIGHTS UP!

Comments

DAVIDK36 (author)2016-01-19

what kind of range do you get and where did you source the LED and power from

TheAmazingMaker made it! (author)2014-08-11

Thank you so much! but I had only two of the materials so I made it a bit differently but made this… Looks better at night though

furrysalamander (author)2011-12-13

Cool, but why all caps?

rsrizwanz92 (author)2011-10-23

Thank you!

KaptinScarlet (author)2011-10-20

nice and easy and a good effect

About This Instructable

19,665views

41favorites

License:

More by rsrizwanz92:EASY BATMAN SPOTLIGHT
Add instructable to: