Infrared (IR) Webcam
FACEBOOK
TWITTER
EMAIL
EMBED
PRINT PDF
step 3Seperate the lens enclosure from the PCB
Next you need to try and separate the unit containing the lens (the bit
which faced the outside world) from the PCB chip. In my case this was
connected by two screws and a sticky pad, although yours may be different.
DO NOT TOUCH THE NEWLY EXPOSED AREA OF THE PCB.
Put the PCB to one side, but try and cover the newly exposed area so that dust can't get to it.
DO NOT TOUCH THE NEWLY EXPOSED AREA OF THE PCB.
Put the PCB to one side, but try and cover the newly exposed area so that dust can't get to it.
|
|
To View All Steps on one page, Go Pro Today! |
