Instructables
This is how I put away my mp3 player. This way I do not have to deal with inextricable knots next time I want to use it. Since I am not good with words here is a video. enjoy.



This may increase the chance of fracturing the inside cables which is bad for your headphone cord.
Disclaimer: DO THIS ON YOUR OWN DISCRETION AND RISK AND THAT YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE OR INJURY.
 
Remove these adsRemove these ads by Signing Up
masterpeace5 years ago
sweeet
tinkernaut5 years ago
Ultracool! A clear WYDITOIM* winner!

(*why didn't I think of it myself?)
Toaster2645 years ago
I award you one cookie for your good idea.
Pal7 years ago
While I can't watch the video from work, it looks to be a hangman's noose type of knot? If it isn't you can use a loose version of that without it causing sharp bends or anything that would damage the cord. I loosely flip the cord back on the player, then wrap the cord around the body (going over the cord as well) until I'm at the end of the cord, then tuck the buds under the first loop and pull a little on the original end of the cord (still attached to the player) to tighten it a little, and it all holds into place. Again sorry if this is what your video is showing, I can't watch from work. It would just be a "looser" version of what your picture seems to show.
baneat Pal6 years ago
No it's a lashing knot
woosh3 (author)  Pal7 years ago
Yes, I agree. looser is better for the headphone.
gamaster6 years ago
crap i cant see the vid.
mrjubjub6 years ago
or you can just put it in your pocket
this is a pretty good .it is very simple and looks good
Great tip, simple instructions and no more tangles.
jamnoopers7 years ago
This is a very good idea. Thanks.
That knot's what people use to keep the ends of rope from fraying. The headphones are instead a thinner peice of twine than what the rope is. I never would have thought of applying it to an mp3 player/headphones. Neat-o.
woosh3 (author)  Ducttapeovrlord7 years ago
Hehe, thank you. I got this idea from rock climbing.
windyhart7 years ago
cables are meant to bend... everyone's seen coiled mic line (XLR) the trick is to wind it consistently so the interior wires are pulled in different ways each time, leading to breaks. the cool part of this is doing it quickly, storing your cables on the go... however, it seems like if you put a little thought and time into coiling it according to a pattern it could be okay for longer. plus, come on... they're cheap-o headphones in the first place. it'll take some time to break them, and were you expecting them to last forever anyway?
oops... i mean to say that the interior wires AREN'T pulled in different ways, ack... sorry... and i forgot to say awesome post, i'm totally using it...
bdsocali867 years ago
i dig it, props to you sir, as well as kudos
idiotjohn7 years ago
I reckon that is mad!!! I have a zen v and it's always getting tangled in my pocket.
darkmotion7 years ago
That will totally screw up the chord, because the right bends cause the cable to fray on the inside. I used to wrap my ipod headphones tight, and their inner wiring is all cloth/mesh cable, so it quickly broke. Never wrap them tightly.
userman7 years ago
thats just like.. really bad for your headphone cord? if you wrap it like that you increase the chance of fracturing the inside cables. so maybe you can add that to your instructable.
woosh3 (author)  userman7 years ago
Good point, thank you. I have updated the instructable.
dudbolt7 years ago
Hmm, great idea. Gutted when i unwrap my head phones and find that they are the "one short, one long" type that goes behind the head. :(
christy7 years ago
totally awesome.
Punkguyta7 years ago
I found your instructable's name rather misleading and was profusly offended when I saw all you were doing is wraping the cord up. I thought you wer gonna show me how to tie your mp3 player into a knot. Thumbs down
abosnak7 years ago
excellent
Mitten7 years ago
I love it! It's simple, quick, and gets the job done. Works with nanos too
e13377 years ago
Its a loop knot... Cool.