I was inspired to do this project after seeing the PVC light tent posted on the MAKE blog. This light tent uses a cardboard box, and some white material (Tyvek) and allows you to take reasonable photos of products such as bottles, watches, jewlery, small objects, etc. There is lot's of room for improvement but for the sake of 15 minutes I hope you will agree it's pretty good :)
Remove these adsRemove these ads by Signing Up

Step 1: Select materials

First thing to do is find your self a usable box. The box I used is a half of a resin plastic shelf. The dimensions are roughly 16" x 15" x 15". This size has handled most things I have put in it, however I think something a little wider would be easier to use.

Materials used

- Masking tape or other heavy tape (Duct, packing, etc)
- X-Acto knife
- Ruler
- Glue Stick
- semi transparent white material (Tyvek, White suiting/Ripstop nylon, bed sheets, etc)

Step 2: Cut the box

1) Lay the box flat

2) using the ruler add a 1" to 1-1/2" border to all sides of the box (top, bottom, left and right) - Essentially you want to cut a hole in all sides of the box.

Tip: don't forget to add a line on either side of the center of the box as it lays flat :)

3) Cut out the four panels of the box using an x-acto knife and cutting on the lines.

See the images below if the above is unclear.

Step 3: Assemble the Skeleton

1) Open up the box and close the bottom of the box

2) Tape down the exterior and interior seam.

3) The Bottom of the box will serve as the platform for placing your objects.

Step 4: Wrap the box

1) Using the semi-transparent material you have chosen wrap it around the box so that it covers 3 of the four sides

2) I used sign printing grade Tyvek and attached it using a glue stick.

Step 5: Add continous background

This is part of the magic of the light tent, creating a continous background in your images. To do this we add a piece of bristol board cut to fit the box.

1) Use the depth of the box + the height of the box as a rough measurement.

2) Cut out a piece of bristol board that matches the dimensions above

3) This creates a nice white platform to shoot your images against. Try using other colors, Blue, Black, etc.

3) Insert the bristol board into the box so that the edge of the bristol board is placed against the front of the box and th card board is allowed to curve like a wave, half-pipe, you get the picture (I hope :) )

As usual the pictures will make it all clear. :)

Step 6: Add light and enjoy

1) Now that you have th box wrapped, and the continous background in place you are ready to take some photos.

2) I used a desk lamp, and a couple of Ott lights (13watt) for the apple shot in the beginning of this instructable.

3) for better/different results I am switching to the simple clamp style fixture used in the PVC light tent with 100 watt bulbs.

4) experiment with light location and diffusing the light that shines through the top of the box with other semi transparent material, nylon, etc.

The light entering the box will be diffused and the shadows will soften or disappear...

***NOTE: At this stage (or perhaps before) you can and probably cover the inside of the box with white as well, at least the frame. Or you could switch the white material from the outstide to the inside. I bring this up because It was pointed out over at ( that there is a black reflection in the photos produced using this box.
... I hope that will fix it :)

Step 7: End Result

Here are some examples of shots taken with this light box.. I am by no means a photographer but to my untrained eye these shots look pretty good.
1-40 of 80Next »
dingle8 years ago
Picture taken with newly constructed Light Tent. Thanks.
woah, cool rings. What are those made of? If you made them I would definatley like to find out how.
they are made of a high temperature Dupont material at the plant where i used to work,
Looks like you need a stronger light.
Nice !
chazortiz1 year ago
Thanks for this instructable I used a smaller box and used parchment paper and I was extremely satisfied with the results.
sscarfo3 years ago
This was GREAT. Just built mine yesterday and pics are coming out nice.

Here's a link to the test pics on Flickr ( )

Only suggestion is that a person only needs to cut out 3 holes (the back doesn't need cut out, and the top flaps can be cut off). Keeping the back on makes it a bit sturdier.

stuuf5 years ago
Here's my version: I made the side and top panels from vellum taped to foamboard frames. The pieces fit together with tabs and notches so it's fully collapsible. The two origami photos underwent some minor contrast enhancement in Gimp.
Fun2Hold stuuf3 years ago
Those pictures are awesome. And I like the clean folds of your origami as well!
dingle8 years ago
Taken with newly constructed light tent. These are high temp micro molded pieces that my company makes, about the size of a nickel.
craftyv dingle3 years ago
You still need much more light.
NatNoBrains4 years ago
I edited mine to make it lighter in the background :)
For this you need a strong white light, like a dentist lamp.
Mrballeng4 years ago
I'm, for sure, making this. Thanks!
beehard444 years ago
you can toy around in photoshop to adjust the color of the piture so that the background is white
Puzzledd4 years ago
This looks great! I love that it's so quick and cheap to make for amateur snappers!
Puzzledd4 years ago
This is the bit I was missing when I made my own light box! Thanks for the tip!
maniacse4 years ago
excellent! perfect idea!
karlswain4 years ago
Excellent idea. I have a light tent but the door is quite small to get thing in and put of. I can make my own now, to the spec I need. Cheers for the instructable
jamwaffles4 years ago
With me starting a company soon, and needing pictured of product and all, this project looks brilliant. Also, I'm right in saying the light has to be white (not an incandescent) and everywhere to get rid of those really soft shadows you see? James
qwertyboy4 years ago
I made one too, although I need more lights.
Jayefuu4 years ago
Ohhh I get it! I came here with the expectation of it being a light tent. IE it weighed nothing. :p I had no idea how an apple related to camping! Nice box, I will be making one of these, thanks!
(removed by author or community request)
 Here are some eaxamples of how work.
Tip: improve your photos with the photography postproduction web site .
KnexFreek5 years ago
 5 stars!
Sokje5 years ago
Def. doing to make this!
Great tut. ;-)
(removed by author or community request)
A picture does not have to be centered to be good. Rule of thirds. But that isn't even using the rule of thirds....
C'mon dude its not in focus or even centred LOL
Yes,And Way to dark on the edges,He probably has a bad camera
(removed by author or community request)
(removed by author or community request)
Its not exactly In the light tent
(removed by author or community request)
It is inside the Tent but its a tiny little world inside his tent lol
a tiny world inside the tent? i don't get what you mean...
He did take the picture in his light box but he recreated a tiny world inside it. lol was kinda rubbish lol
1-40 of 80Next »