With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Here's a relatively easy El Wire bracelet Many materials of this project are developed and distribuited by http://www.plugandwear.com/ company
- CR 2032 coin cell battery holder - CR 2032 lithium 220 mAh battery - some pieces of stainless steel, copper, brass fabrics http://www.inntex.com/shop/index.html - 50 cm copper and ...
apply a small amount of silicone sealant over the purple polyester ribbon
Join the El Wire tape together with the polyester ribbon
mark the middle of the two tapes already glued
cut the El wires
connect the El wires as shown in the picture For EL Wires soldering see this tutorial http://www.plugandwear.com/default.asp?mod=cpages&page_id=19
Cut some of the pieces of metal fabrics to make two flowers. Make a hole of 13 mm diameter on the small flower to insert the micro El ...
glue the tubolar ribbons around the flowers petals
Cover the micro El Wire inverter with a small amount of brass fabric using silicone adhesive sealant and insert it in the small flower
Glue the coin battery holder in the middle of the big flower. The two metal pins of the battery holder must go right through the fabric for the ...
Connect the coin battery holder, the El wire inverter and the El wires
Apply silicone adhesive over the middle of the bracelet to fit the two flowers in order to hide all the wire connections
Wear the bracelet Cut the end of the ribbons according to your measurement required Place small piece of heat shrink tubing on the ends of El Wires as ...
Apply some silicone adhesive into the alluminum profiles and then insert the end of ribbons inside Stick the neodymium magnets to the alluminum profiles using cyanoacrylate glue
Cut a small disk of tranparent plastic sheet with CR 2032 sizes Make a snick as shown in the picture Put the disk between the + pole battery ...
How to Wire Wrap a Heavy Duty Clasp for All Different Types of Jewelryby JewelryLessonVideos
Bead Bracelet Designs to Make - How to Make a Beaded Flower Braceletby DasiyD
Mini Disks Braceletby mazzy mitchell
DIY Wire & Seed-Bead Braceletby Muhaiminah Faiz
Accessories made using Gear Wire!by anieses
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »