Instructables
this is a very simple tripod for a camera that you can keep in your pocket. just screw it onto a water bottle, which shouldn't be a problem since there are coke machines everywhere.

Step 1: What you'll need

materials:
1 1/4" hex bolt, 3/4" long
2 1/4" hex nut
1 bottle cap

tools:
drill
1/4" drill bit

time:
< 5 minutes

cost:
< $.50

Step 2: Drill bottle cap

use a 1/4" or slightly smaller drill bit and drill into the center of the bottle cap.

Step 3: Screw nut 1

screw one of the nuts onto the bolt all the way down.

Step 4: Add to cap

screw the bolt onto the bottle cap.

Step 5: Screw nut 2

screw on the other nut.

Step 6: Use

screw the bottle cap onto a full water bottle. depending on the siz of the camera and location of the tripod mount on the bottom of the camera, it should hold.
 
Remove these adsRemove these ads by Signing Up
That's a monopod
Well actually yes and no...Monopod (literal sense yes, ofcourse), you need to hold it in hand and shoot. Since we dont need to here, its not a monopod.

Oh thanks

jabujavi5 years ago
simply. perfect
jayro7076 years ago
sweet
Brilliant!
Patented6 years ago
you can add sand in the bottle
origamimavin (author)  Patented6 years ago
that's not a bad idea for a more stationary monopod.
clarissa2k66 years ago
or you could you some accordion water bottle for tilt functionality
wasserman086 years ago
Crap I was just about to make my first instructable off this, good thing I checked first.
teresajoy7 years ago
Not exactly a tripod when it dosen't have 3 legs. Its more of a monopod.
rimar20007 years ago
Anyway, it's genial.
PetervG7 years ago
REPOST
Yes. This was just posted a couple of weeks ago as Make your own camera monopod with a bottle-cork by hobbyman.se.
origamimavin (author)  LasVegas7 years ago
damn, i didn't know. oh well. i'll leave it up, anyways.