This TV-B-Gone uses a 9V battery to send its signal through a matrix of 20 IR LEDS. This extends the working range of the device to about 90ft (line of sight). Using this in a regular sized room you are pretty much guaranteed to kill the TV no matter where you point it.
 
Remove these adsRemove these ads by Signing Up

Step 1: Get the Stuff

You wont need much to build this, here is a list of the materials:
1TV-B-Gone
1 2N3904 Transistor (experiment with what you have around, it will probably work)
1 9V battery
1 9V battery holder
20 IR LED's

As far as tools go here is what I used:
soldering Iron + solder
desoldering pump
hobby knife
plyers
wire cutters/strippers

If you dont have the TV-B-Gone already you can get one at the Make Store: http://makezine.com/store/
1-40 of 247Next »
ewilhelm says: Apr 1, 2008. 9:38 AM
Pizzapie500 says: Aug 13, 2012. 11:39 AM
Would these LEDs work? If so, this would be very cheap. http://www.taydaelectronics.com/sensors-transducer/optical-sensor/infrared-led-940nm-5mm-tsal7400.html
d60Dave says: Feb 25, 2011. 8:49 AM
Hi,

Perhaps my TV B Gone unit is different but as standard the IR LED positive terminal is connected to the positive of the battery and it appears to be the negative side of the IR LED that is switched to turn it on and off.

If as you suggest the positive side of the IR LED is connected to the base of a 2N3904 (npn transisotor) with the emitter connected to 0V there willl be 9V across the base-emitter junction. It will therefore be on all the time or at least until it blows which shoudn't take long as a typical npn can only support about 0.7V (one diode drop) across the base-emitter.

Am I missing something??

Dave.
jrigvd in reply to d60DaveJul 25, 2012. 11:49 AM
Hey Dave, I think your tv-b-gone is different than the on described here. Maybe you can use an PNP transistor instead of the NPN described in the instructable.

Jordy.
vlxwgn says: Apr 22, 2007. 11:13 PM
because infrared light is picked up by digital cameras, would this work as a night vision light?
Michael_Bell in reply to vlxwgnApr 25, 2012. 5:33 PM
You dont even need the tv be gone! Just search up infra red night light, or some such :)

what you do is that you make a ring of thes irleds in a ring around the camera
Kevio bro in reply to vlxwgnJul 24, 2009. 10:50 PM
it would probably blink though
The nerdling in reply to Kevio broMay 8, 2011. 6:19 PM
not if you just connect it to 3 volts, i have done it and it dosn't blink
degenstamm says: Oct 28, 2011. 4:52 PM
so im trying to find someone legit can i make it with a ir detector and emitter or do i have to get something diffrent
ksikes says: Aug 19, 2011. 6:31 AM
Do you think its possible to build your own TV?
bears0 in reply to ksikesSep 20, 2011. 6:42 PM
someone said their dad made one. don't remember who, but it would not be a project for people with limited supplies equipment or tools.
putty1cat says: Jul 25, 2011. 11:57 AM
My tv b gone is different but I went ahead and tried to mod it. I get nothing out of it. I am clueless. Can someone brainy, please, have a look and tell me what I've done wrong? This is only my second soldering project. The chip is the SE02 500 A3A3 if that is any help.
2011-07-25-192121.jpg2011-07-25-193009.jpg2011-07-25-192215.jpg2011-07-25-192407.jpg2011-07-25-192449.jpg2011-07-25-193422.jpg
64bitgenius says: Jul 16, 2011. 5:42 PM
ok...next step is to gather over 9000 ir leds and do this. lets turn off the tv's in a town....
ahughes says: Mar 31, 2011. 1:25 PM
Ok i have the tv b gone from thinkgeek that i got on march 22 i opened mine and it has a couple extra things and don't know if this is compatible with the one i have or if you can make one for the newer tv b gone it would be very appreciated.
ahughes in reply to ahughesMar 31, 2011. 1:57 PM
here are some pics of the tv b gone i have so u can tell me if this mod will work on it.
Photo_00002.jpgPhoto_00003.jpgPhoto_00004.jpgPhoto_00005.jpgPhoto_00006.jpgPhoto_00007.jpgPhoto_00008.jpg
putty1cat in reply to ahughesJul 16, 2011. 8:59 AM
I also would like to know the answer to your question. This is the gen 4 TV-B-Gone. I have made the IR LED array. From what I understand the bottom battery powers the micro controller so I am leaving that in place. The thing that stumps me is the capacitor. So being the curious person I am, I will eventually just solder the negative wire from the 9v battery pack to the negative side of the capacitor pad. The positive to the pad of the existing battery case just below the capacitor. At this point I imagine you all can guess I really don't have a clue what I am doing. Please correct me. Then I will house it all inside of a tic tac 100 plastic box. Like it says on the packet 'Refreshing little lifts'.
The nerdling says: May 8, 2011. 6:03 PM
get an old video camera with night vision and turn it on then point it at the tv b gone with night vision on and see what happens, it is cool
codongolev says: Mar 27, 2011. 12:18 PM
I love huge matrices of LEDs and I cannot lie.
Parakeet Crazzzy says: Dec 10, 2008. 4:19 PM
Um Does This Destroy Ur Tv So It Wont Work Again?
BGreenHVAC in reply to Parakeet CrazzzyMar 27, 2011. 8:51 AM
no .....silly, it just sends a signal (just like a regular remote) telling the tv to turn off.
Derin in reply to Parakeet CrazzzyApr 23, 2009. 1:51 AM
You only capitalize the first word in a sentence.
ShogunD in reply to DerinMar 11, 2012. 10:51 PM
My question is why the hell someone Would Take The Time To Press The Shift Button For Every Single Word.
My pinky is tired.
overblast in reply to DerinApr 3, 2011. 9:10 AM
derin, This Is Not Craigslist, No Spelling Or Grammar Nazis Allowed Here,
pyroelfears in reply to Parakeet CrazzzyApr 9, 2009. 4:04 PM
it has a program that has all the tv remotes "off" pattern. Each tv is different ( different modle) and has a special inferad signal which turns it off. The tv-be-gone knows and plays one by one, so it may take a few seconds for the tv to turn off.
fwjs28 in reply to Parakeet CrazzzyMar 19, 2009. 12:40 PM
no it wont...it just sends some sort of signal (not sure) that turns the tv off...it doesn't kill it
things says: Dec 9, 2009. 10:30 PM
 lol, why bother with 20 little IR LED's when you can buy 3W star LED's? :D

I built a TV-B-Gone using an Arduino and 6 3W IR star LED's with lenses. I could turn off TV's from down the street if they happened to have their windows open :D
TheAtheist in reply to thingsMay 18, 2010. 3:50 PM
Could you please tell me how you did it?? Seems really interesting.. A circuit diagram and the necessary components would also be of much help..
Whats a 'Star LED' btw?
crzy engineer in reply to TheAtheistDec 26, 2010. 5:32 PM
The 3W IR LED's "things" is talking about pump out a tremendous amount of Infra Red light. Since the 3W's take up more space all you have to do is accommodate space on your bread board or circuit board.

And of course you can always ask Google for more info on the 3W IR LED's

CE
DominicEdmundoVelazquez says: Mar 26, 2011. 12:04 AM
good work
Highjump44 says: Apr 12, 2009. 6:16 PM
(removed by author or community request)
mictester in reply to Highjump44Dec 14, 2009. 11:32 AM
The instructions are dumbed down to the point of imbecility...  it's probably NOT possible to simplify them further to the level of "moron".
Hubiewan in reply to mictesterJul 21, 2010. 6:56 PM
I'm guessing you're good at tech. stuff, but are short on understanding. Many of us have other gifts/skills that you don,t have. Don't be too hard on us. Try a little humility, it'll save you lots of anguish as you age. Ultimately, the ravages of time, then death, humble us all. To the arrogant, it is a more painful journey.
hyudryu in reply to mictesterFeb 23, 2010. 8:46 PM
Ya i agree :D
PsyOp says: Dec 8, 2009. 12:21 AM
 I would love to have an ULTIMATE tv b gone! How can I buy one?
trevor3693 says: Aug 18, 2009. 8:11 PM
you could use this to cheat with the havoc heli battle set.
dagob says: Jul 24, 2009. 4:43 PM
You can use it for videos at night, you can transform a regular video camera to a "powerful" nightvision camera. Have you ever tried it?
mage says: Jun 11, 2009. 10:42 PM
if the leds are configured in a dome could i kill every TV in a room?
Redgerr in reply to mageJul 20, 2009. 10:26 AM
you could try... i wouldnt be supprised.. but you gotta watch out for camera's.. a lot can pick up on the light ;)
rocketbat says: Mar 10, 2007. 8:58 AM
i currently have about 100 ir LEDs i was wondering, since it is in parralell would twenty five rows of four work? (evil laughs!)
tod123 in reply to rocketbatJun 17, 2009. 10:38 AM
Yes but you would need a bigger transistor, and i dont know if a 9v battery can supply this kind of current
1-40 of 247Next »
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!