Introduction: E.T.(Action Figure,3dprinted)
An articulated figure, inspired by the film "E.T."
-Modelized in a software3d, printed with a printer3d
Step 1: EQUIPMENT
-acrylic paint and brush.
Step 2: 3D Modeling
-The figure is composed of 9 parts:
Step 3: 3D PRINTING
ALL PARTS were printed with these parameters:
(I recommend all the same to print it with a layer thickness of 0.10mm for more precision.)
Step 4: Post Production:
1)I use a smoothing coating to mask the imperfections left by the supports.
(I let dry and then I lightly sand)
2)Primer paint spray.
3)I paint the character with a brush and acrylic paint.
Step 5: Link