Marshmallow Shooter

 by Howtoons
Using PVC pipe you can make this amazing marshmallow shooter.
 
Remove these adsRemove these ads by Signing Up
supertroopa86 says: May 22, 2011. 12:21 PM
Am I the only one that noticed the bedroom door looks like its from Dexter's Lab?? Guess im just that old :/
Feature Comment
the_burrito_master in reply to supertroopa86Nov 6, 2011. 4:16 PM
not the only one, however dexter's door is much cooler.
R0B0T5_R0CK says: Mar 19, 2011. 3:33 PM
make sure the clay is on the side that you connect the barrel to, that is very important.
Feature Comment
R0B0T5_R0CK says: Mar 19, 2011. 3:32 PM
I too, have one of these. me and my friends will run around shooting each other with these but we do not use marshmallows, we use Nerf darts, preferably the suction cup darts because the create a better seal. Mine is a sniper, it has a long barrel on it and i made a scope like thing and spray painted it black and green. Also, in the T-joint fill one side with clay and put a small hole in the clay, this increases range. Although you will have to increase or decrease the size of the hole until you have it set up for optimal range.
Feature Comment
NitroRustlerDriver says: Dec 18, 2010. 4:13 PM
I made a few of these for my niece and nephew for Christmas. Used my vinyl plotter to decorate them. Very fun!
Isabella's Gun.JPGJacob's Gun.JPGSahara's Gun.JPG
Feature Comment
bwool1 in reply to NitroRustlerDriverJan 1, 2011. 4:36 PM
Those look very professional! You could make some money off of those things if you wanted to!
cmjhawaii says: Dec 9, 2009. 11:06 AM
Forgot to mention that my daughter's mallow gun was spray painted not just plain white.
Feature Comment
cmjhawaii says: Dec 9, 2009. 11:02 AM
My 9yo daughter just got a marshmallow gun as a birthday present from her friend.  They had so much fun blowing the little mallows out.  Even I had fun with it.  Great idea.  I'm planning to make some for family and friends.
Feature Comment
gigocorp says: Jul 28, 2009. 12:05 PM
This is fun to build and very inexpensive. Having made the one in the video below we plan to buy a bunch of pvc pipe and connectors and have a neighborhood-wide shooter-making session at our next block party. We've priced it out and we can make these for less than $2 if you buy the 10' length of pipe. We also plan to buy a pvc pipe cutter as the hack saw makes too much pvc dust and requires the extra step of sanding the edges.

http://www.instructables.com/id/WREXLabs-Episode-006-Marshmallow-Shooter/

Feature Comment
savagenarce says: Jun 16, 2006. 1:54 PM
Basically a blowgun with handles stuck on the side. Save yourself some time, money and effort and just use a straight piece of pipe.
Feature Comment
AtIas in reply to savagenarceJun 18, 2009. 2:14 AM
That's not as cool looking, besides this is far more functional (better accuracy)
Indiana Red in reply to savagenarceSep 18, 2006. 9:25 AM
Well, then go even simpler and just throw the marshmallows. The gun handles are part of what make it "cool" too.
zachninme in reply to Indiana RedOct 8, 2006. 10:46 AM
Have you ever tried to throw something as small and light as a marshmellow? Call me if you go over 2 yards!
chardster in reply to zachninmeJul 11, 2008. 5:58 AM
Have you? It will go just as far as a gun.
dan in reply to savagenarceSep 11, 2006. 4:10 PM
no, the T joint provides a critical pressure/release mechanism which causes it to shoot much farther than a blowgun.
chardster in reply to danJul 11, 2008. 6:52 AM
I like the blowgun just the same, i think it works great. The shooter jams unlike the blowgun. The shooter looks cooler than a blowgun, so i painted mine, Sorry about the crappy camera.
attachment.jpg
NaesDraw says: Feb 27, 2009. 6:56 PM
As long as you have an unbroken(no joints) length of pipe and the right size, these will do nerf too. I made one that was one long tube, then the handles were T's one size too big, with tape around the barrel to make them stay put. Works well. Just remember no joints or it will jam.
Feature Comment
Viddaric says: Apr 6, 2007. 5:29 PM
awesome! let me give you a few pointers. a longer barrel makes more accurate shots, so lengthen it to about a foot. also, the "improvement" made by Celene in the comic would not work. the marshmellow would get jammed into one of them, than the others would let the air out. also the marshmellows would not get into the other 4 barrels
Feature Comment
Smexy Dead in reply to ViddaricJul 28, 2007. 7:47 PM
What if you loaded the mashmallows directly into the barrels?
chardster in reply to Smexy DeadJul 11, 2008. 5:52 AM
It would "work" but it wouldnt go far. I have tried all kinds of PVC marshmallow shooters and this basic design works the best.
cocothunda1 says: Oct 12, 2006. 5:24 PM
where can u buy colored pvc. already colored not painted
Feature Comment
chardster in reply to cocothunda1Jul 11, 2008. 5:38 AM
you cant. When they make PVC they dont think plumbers will care what color it is. All you need is some spraypaint.
jerielng says: Feb 23, 2007. 4:47 PM
where can i get a pvc pipe?
Feature Comment
chardster in reply to jerielngJul 11, 2008. 5:33 AM
I think lowes has the best selection and staff
Waffles Will Rule in reply to jerielngDec 15, 2007. 10:04 AM
Like home depot or Lowes. Any "Hard-Work" place. Or You can ask a plumber! xD
Obsessive says: Apr 6, 2008. 10:44 AM
Ha!
I love these things.
I actually purchased one last year for a dollar at a convention for some sort of fund raiser.
It was identical to the shooter in the 11th frame.
Feature Comment
sue5790 says: Jan 11, 2007. 10:09 PM
Where do I find the instructions to make these marshmallow shooters? I have clicked everything I know and don't find them. I clicked the PDF, but all I git was the same cartoon shown above.
Feature Comment
Waffles Will Rule in reply to sue5790Dec 15, 2007. 10:09 AM
Click the PDF and let it open. Then zoom in on the plans in the comic. Then you can read them.
sljusak says: Dec 8, 2007. 11:23 AM
We made 8 of these and took them to a civil war reenactment and had a great time after the official battle. One confederate private couldn't believe that he "got himself" a federal officer!
Feature Comment
dwungnema says: Dec 2, 2007. 8:24 AM
I did this for a demonstration speech for my public speaking class. It was the bomb! My ten year old kid loves it too.
Feature Comment
mammoo93 says: Oct 30, 2007. 12:31 AM
I think someone should make an instructable on a marshmallow gun that is pre-pressurised and has the ability not to empty the whole chamber at once. A sort of paintball gun that shoots marshmallows.
Feature Comment
legosoldier says: Aug 13, 2007. 2:57 PM
hey go to youtube and type in marshmallow snipercam look at the guns his kids guns look like there more accurate then 2 handle
Feature Comment
stellamojo says: Dec 5, 2006. 11:39 AM
There's always a party pooper in every bunch! I think this is GREAT and am going to make a buttload of 'em for Christmas presents!
Feature Comment
spartana says: Oct 27, 2006. 6:59 PM
This is sooo cool and it dont hurt when you get hit in the side of the head. Thanks!
Feature Comment
Slips says: Mar 26, 2006. 1:49 PM
awsome
Feature Comment
chan27 says: Mar 5, 2006. 10:53 PM
sweet
Feature Comment
themaster says: Mar 1, 2006. 6:33 PM
cool!
Feature Comment
jifblumoon says: Feb 18, 2006. 1:30 PM
me and my frend were going to make this a year ago but we were to lazy and just used the 1/2 in pipe like blow guns with grapes they got allover the house, my mom was pissed
Feature Comment
joshminer says: Dec 12, 2005. 10:04 AM
I am a 22 yeard old kid and my little cousin made us these for christmas... they are awesome for all ages... my wife might not agree becuase i shoot marshmallows at her all day... but its awesome!!!
Feature Comment
tfleet says: Oct 6, 2005. 8:29 AM
This is such a wonderful idea. My boys just love playing with them. For my son's 7th birthday party, I made one for each of the kids (instead of treat bags)I made a bulls eye, and they just played for prizes. Thanks for this.
Feature Comment
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!