Monkeylectric Model 132s Installation Instructions

by dan

Step 2: Check that it works before installing!

- insert 3 batteries and check that the device works before you attach to the wheel!

- Press the POWER button to turn on or off the device, and change brightness

- move your mouse over the photo below to see what the different parts are

- REMOVE THE BATTERIES BEFORE INSTALLING

Remove these ads by Signing Up

About This Instructable

10,387 views

2 favorites

Posted:
[date]

License:

dan MonkeyLectric

Follow680

Bio:Dan Goldwater is a co-founder of Instructables. Currently he operates MonkeyLectric where he develops revolutionary bike lighting products. He also writes a DIY column for Momentum magazine.

More by dan

Total Views	10,387
Views Today	12
Comments	3
Favorites	2

Featured Groups

Monkeylectric Model 132s Installation Instructions

Step 2: Check that it works before installing!

About This Instructable

About Us

Find Us

Resources

Mobile

3 Simple Ways to Share What You Make

Create on the go:

Featured Groups

Monkeylectric Model 132s Installation Instructions

Intro: Monkeylectric Model 132s Installation Instructions

Step 1: What you need

Step 2: Check that it works before installing!

Step 3: Check fit and placement

Step 4: Attach the first mounting point - loosely

Step 5: Attach the second "A" mounting point - also loosely

Step 6: Attach the third mount point ("B"), also loosely

Step 7: Slide into final position

Step 8: Tighten the Zip-Ties

Step 9: Check that it is tight!

Step 10: Trim the Zip-Ties

Step 11: Add batteries and you are done!

Step 12: Example: 36-spoke BMX wheel

Step 13: Example: 40-spoke BMX wheel

Step 14: Example: 18-spoke racing wheel

Step 15: Example: 24-spoke fancy Mountain Bike wheel, rear

Step 16: Example: mounting close to the hub - for high speeds

Step 2: Check that it works before installing!

About This Instructable

About Us

Find Us

Resources

Mobile

Get More Out of Instructables

Already have an Account?