This instructable is a spinoff of myDIY Linux Fish Ornament DIY Linux Fish Ornament, except for a different venue, making an Eagles team logo ornament for my sports fan brother.

Please rate this if you like it. Thanks!

Step 1: Bust Out Your Solder and Soldering Iron

For this project, you will need:

-Solder (or some kind of wire)
-Soldering Iron
-Needle nose pliers
-A Dremel or sandpaper

Heat up your soldering iron while you get the basic shape bent into place. I used a pic from google images to get the basic form down. Once it's bent, solder the two ends together. I do my soldering jobs on the back to keep a neater front.

Step 2: Add the Features to It

Look for the fine points of the pic and lay them out on the first, eagle shape. Solder them into place. I suggest wearing gloves because the solder/wire gets hot!