Introduction: Easy Arduino IoT With Cayenne

Picture of Easy Arduino IoT With Cayenne

This is my first time make a simple Arduino IoT (Internet of Things) project with Cayenne, for controlling an LED & monitoring analog value of a potentiometer. No need any IoT board (Intel Galileo, Intel Edison, Arduino Yun, etc), IoT shield (Ethernet shield, Yun shield, etc) or IoT module (ESP8266, etc). Just use an Arduino Uno & connected to a PC. Cayenne can be accessed from desktop web page or simply use its Android/iOS application on smartphone. More information visit cayenne.mydevices.com. First, watch the demo below.

Step 1: Demonstration

==========================================================

Please wait for its fully instructables. I'm trying to make it complete as soon as possible. Thank you very much.

==========================================================

Email : lintangwisesa@ymail.com

Facebook : simpLINnovation

Twitter : @Lintang_Wisesa

Blog : simpLINnovation.id

Youtube : simpLINnovation channel

Comments

About This Instructable

1,030views

6favorites

License:

Bio: Nothing special ^_^
More by Lintang_Wisesa:ESP8266 NodeMCU, Netpie.io & Freeboard.io ESP8266 NodeMCU, Sparkfun Phant.io & Freeboard.ioESP8266 NodeMCU & Thethings.io MQTT
Add instructable to: