Introduction: Easy Blowpipe and Dart :)

You will be needing:
> TAPE
> NAILS
> NOSE PLIERS
> SCISSORS
> 1/2" PVC PIPE WITH 1/2" TO 3/4" CONNECTOR AT ONE END [ I WOULD RECOMMEND 24" i.e 2ft ]
> SUPER GLUE
> PAPER/ PLASTIC/ CARD BOARD..
> THREAD

Step 1: Making Dart

1> Take a paper and fold it in half.
2> make a cone shape and secure it with a tape.

Step 2:

3> cut that cone to the size that fits your 1/2 " PVC pipe.

Step 3:

4> Tie a knot around nail's head.
5> Cut the nip of the cone, enough to fit the circumference of the nail.
6> Put the second end of the thread FIRST in the cone, then wrap the thread around the nail's head.
7> Now push the nail in the cone with the help of nose pliar.

Step 4:

8> now pull the nail with the help of plier.
9> pull the thread and wrap it around the nail and cone.
10> secure it with tape.

* in addition.. you can also apply 2-3 drops of super glue to your dart to make it even more secure.

Step 5: Some Darts That I Made..

Here are some darts that i already have made.
>Yellow one's are made up of paper cone and pins.
>Green one's are made up of plastic (that i cut off from soda bottle) and nails. [ THESE DART ARE AWSUM!! ]
>Red one's are made up of card board and nails.

Comments

author
freeza36 (author)2012-02-24

Hey i just wanted to know your input to the question that Higgs Boson, myself, and another one of our friends are all asking. What can be done to make the blowguns better at this point? Yours and ours are practically identical. Even with the best darts we can make, they still only ever shoot accurately at a max 35 feet. What do you think?

author
wajahat911 (author)freeza362012-09-08

https://www.instructables.com/id/Self-made-Airgun-for-blowpipe-or-else/
Chk this out