3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

Easy CO2-powered Squib for Self-contained Blood and Gunshot Special Effects

Step 2Start the Effect Tube

Start the Effect Tube
Cut off about three inches of the vinyl tubing and set it aside. Take the remaining long piece of vinyl tubing and squirt just a little dab of vinyl cement into the end of the tube, making sure to get cement all around the top 1/2" of the tube without any gaps. Don't worry if it drips a little further into the tubing. Place the cemented end of the tube into the jaws of a vise, a set of locking pliers or a C-clamp, and clamp tightly. Leave to cure for about 8 hours.

While you're waiting for the glue to dry, do the next few steps.
« Previous StepDownload PDFView All StepsNext Step »

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
57
Followers
11
Author:RavingMadStudios
Jack of all trades, master of a couple. Eclectic interests combined with a short attention span make me just knowledgeable enough to be really dangerous.