Print PDF
Favorite
Email
Step 3Assemble the Power-Unit-to-Effect-Tube Interface
Wow, that almost sounds complicated.
Take the tire inflator in one hand. Take the hose barb in the other hand. Screw the hose barb into the threads on the tire inflator. It should screw in easily, as the hose barb should use the same threads as the inflator. That's it.
Take the tire inflator in one hand. Take the hose barb in the other hand. Screw the hose barb into the threads on the tire inflator. It should screw in easily, as the hose barb should use the same threads as the inflator. That's it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
