With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
What you need: - An unwanted cassette - A USB flash drive - Sandpaper or a file - Either tape, blu tack or glue - Marker
Open up the cassette and take out all the parts. Open the USB flash drive and save the circuit bit.
Put the two cassette shell pieces back together and mark where to make the hole for the USB flash drive.
Use the sandpaper or a file to sand down the marked area for the hole. Check to make sure the flash drive will fit.
Once you have a big enough hole, use either glue, tape or blu tack to stick down the circuit of the flash drive on the inside on one of the tape sides...
Put the tape pieces back together and glue if you like.
Done! A cassette tape USB flash drive - the case also doubles as a stand.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »