Introduction: Easy Cheap Lightsaber

This is my eighth instructable, and I am going to say up front that this is not the best of them. But, for those of you who like my instructables, this might be a neat project.

Step 1: Materials

You will need

  • electrical tape or some other black tape
  • a pinwheel or you can use a glow stick

Step 2: No More Flower

Rip off the part of the pinwheel that you blow and make move. If you are using a glow stick skip to step 4

Step 3: Bare Minimum

Rip off anything else you can so that the pinwheel is just a straw.

Step 4: Taping Time

Tape one of the ends with the electrical tape an wrap it around the straw or glow stick until you feel like you have used enough tape.

Step 5: Done

Now you're done, all you have to do is pretend that it is bigger, or make some jedi mini figure to go with it.

Comments

About This Instructable

250views

2favorites

More by GuineaSaber99:How to Make a Spiderman WebshooterHow to build a magic the gathering deckHow to Solve the 2 by 2 Rubik's Cube
Add instructable to: