Print PDF
Favorite
Email
Step 5Fabricating The Swing Arm Motor Mount
Once the hole is complete, and the motor fits snugly into it, we measure and fabricate a mount. Cutting a rectangular piece of 1/4" plate steel, then measure and remove a concave semi-circle, resulting in a custom mounting plate that holds the motor precisely in place.
Two holes are measured and cut for mounting bolts, then the piece is welded to the swing arm and the motor attached.
Two holes are measured and cut for mounting bolts, then the piece is welded to the swing arm and the motor attached.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
