Step 4: Canvas or Picture?
While you're waiting for the glue to dry, why not make a nice canvas-looking picture frame?
What you need:
- a piece of foamboard no thicker than your sticks
- a picture
- a knife
Cut the foamboard a little smaller than your printed picture. I made the foamboard 12x8 cm, and I printed my picture to 13x9 cm.
Make sure there is enough paper around your picture to fold it around the foamboard, to really make it look like a canvas.
Cut the picture with an extra edge of at least the thickness of your foam, and preferably a little more. Then cut it like on the image below, so you can easily fold it and glue it to your foam.
What you need:
- a piece of foamboard no thicker than your sticks
- a picture
- a knife
Cut the foamboard a little smaller than your printed picture. I made the foamboard 12x8 cm, and I printed my picture to 13x9 cm.
Make sure there is enough paper around your picture to fold it around the foamboard, to really make it look like a canvas.
Cut the picture with an extra edge of at least the thickness of your foam, and preferably a little more. Then cut it like on the image below, so you can easily fold it and glue it to your foam.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
