With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
Our other instructable for hollow horns was very wordy. So here's a different and easy method using Crayola Model Magic. Although there are eleve...
Crayola Model Magic - any colour. Or mix colours for a marbled effect. One 4oz bag makes one horn. Twisted plant support (it's hollow). Cheap plas...
Use wirecutters or a hacksaw to cut 2 curly bits out of the centre of the plant support. DO WANT symmetry and 'mirror image'. Do NOT WANT 'spooning'...
Wrap each plant support tightly with thin plastic packaging tape. Graduate it so that it's thicker at the bottom, and tapers off to nothing at the to...
Wrap a long, unbroken strip of cooking paper around the plant support, over the top of the packaging tape. Overlap heaps. Don't leave any gaps. ...
Knead the Model Magic. It comes out of the bag already soft, and a little pliable. Kneading makes it just that bit more so. Roll it into a long cy...
Flatten the cylinder with a rolling pin or similar. Don't roll it too thin. The thinner it is, the weaker it will be.
Wrap the strip of Model Magic round the plant support. Wrap it twice round the base. Continue wrapping to the top, overlapping as you go. Note: the...
Carefully smooth the Model Magic and gently twist it a little, following the direction in which it's been wrapped. This should make it fit better aga...
Take a long piece of FLAT elastic, about 1cm or just under half an inch wide. No narrower, or it will act like a knife, and possibly cut all the way ...
The most annoying part of this is waiting the required 24-36 hours for the horns to dry.
Once dry, the horns need a 'skin' of foam glue, or a mix of foam glue and PVA glue, to seal and strengthen them. The glue dries clear. When you paint...
Tag files as:
Posted:Sep 13, 2010
Faun / Satyr Costumes for Two
Make 3D, Light-up, Twisted animal Horns!
Large Ram/Satyr Horn Headpiece
Devilish DIY: Make a Halfway-to-Halloween Jersey Devil Costume
Origami Devil Mask
Bison Horns and Ears on an Elastic Headband
Quick simple halloween horns
Download our new apps for iOS and android!
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.