Instructables

Easy Knex Covenant Energy Sword from the Halo series!

Picture of Easy Knex Covenant Energy Sword from the Halo series!
An EXTREMELY simple design that is pretty strong and i think it looks cool. Hope you feel the same. My first instructable posted so i hope for possitive feedback but i am able to take criticism if you have any. If anyone has suggestions for any problems they have, then i would like to know about them.
 
Remove these adsRemove these ads by Signing Up

Step 1: The Handle

Picture of The Handle
DSC00160.JPG
DSC00161.JPG
This is extremely simple and you can probrably make it from looking at the pictures.

Here is the parts list:
dark blue rod x4
red rod x4
white connectors (or black like mine) x2
yellow connectors (or gray like mine) x4
Grey connector x1

Step 2: The Back End

Picture of The Back End
DSC00163.JPG
DSC00164.JPG
DSC00165.JPG
DSC00166.JPG
DSC00167.JPG
This is easy as well. Just 2 layers exactly the same then linked with rods or connectors.

This is the parts list:
grey 2 slot connectors x4
orange bendy rods x8
yellow connectors x4
yellow rods x4
green connectors x8
red connectors x2
blue connectors x8
white rods x8
blue rods x6
grey 1 slot connector x2

Step 3: The Blades

Simple yet again. You can use the pictures.

Parts list:
Green connectors x4
tiny green/black rods x4
white rods x2
grey rods x8
orange/brown connectors x16
grey single slot connectors x12

Step 4: Assembly

This is the easyest part. Just follow the pictures and enjoy. If you like it then please leave a comment.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!