Print PDF
Favorite
Email
Step 3Fitting it into a tin.
So right now you should have tested the light to see if it works. It should work. Make sure you test it before you put it in a tin.
1) Drill a hole for the LED. I did mine in the front and I attached the switch to the top.
2) Once you have the hole drilled, place the LED into the hole so the light sticks out
1) Drill a hole for the LED. I did mine in the front and I attached the switch to the top.
2) Once you have the hole drilled, place the LED into the hole so the light sticks out
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
