Introduction: Easy LED Tester

Picture of Easy LED Tester

Hi friends this is syed and this is my first instructables i have opened my instructables.com website is on 19th march 2013 from then i am the repentant of the website today i thought to start contributing to instructables :)

I am writing this instructable because i have got issue how to test a LED when we are building led cube ,where we have to test the leds before fixing in the cube ,we have every time we have to fix a resistor to LED and connect it to 9V battery or LED+Resistor to a five volts power source i.e; adaptor or 7805 regulator power

Step 1: Collecting Raw Materials

Picture of  Collecting Raw Materials
  1. Perf-Board - 1No (required size )
  2. 3.3V battery holder -1No
  3. hookup wires Red and green(P.S: that's your wish to remember polarities here i have used red for + and green for - )
  4. Berg Strip Female 5pins -2No (that's your wish to test no of LED's but the intensity goes down if you add more)
  5. 3.3V battery -1No
  6. LED's for testing

Step 2: Soldering the Board

Picture of Soldering the Board

We need a good soldering iron i use

  1. solderon 25W soldering iron
  2. soldering Led wire
  3. flux paste
  4. soldering stand
  5. desoldering wik

As per the frizing schematic we do the sodlering and the output can be seen in next step

Step 3: After Soldering

Picture of After Soldering

we can see the after soldering our project is ready to jump out testing 100's of LED's

PS: where MH stands for Maker's Hive (https://www.facebook.com/makershive/ ) where this project build

in next step we can see how the LED testing can be done

Step 4: Testing of Easy LED Tester

Picture of Testing of Easy LED Tester

we can see now the Easy LED Tester is ready

we can test the LED's

it's very easy if the leads of led are short then it's easy to know it's working or not

it's very useful when you are dealing with large quantity of LED's (i.e; building cubes and LED Matrix )

Hope you enjoyed this tutorial

please follow me at

  1. https://www.fb.com/scitechindian
  2. https://www.fb.com/makershive
  3. https://www.fb.com/scitechindia
  4. http://www.twitter.com/scitechindia

This is my first tutorial and please help me to win the contest

Comments

nikonman461 made it! (author)2017-05-07

Great Tool

scitechindia (author)nikonman4612017-05-14

Thanks :)

ManjuprasadB (author)2016-05-09

Itz Great and easy

gowri (author)2016-05-09

super project. Thanks for sharing.

scitechindia (author)gowri2016-05-09

thanks for reading :)

rafununu (author)2016-05-09

Does it work for white LEDs as well ?

scitechindia made it! (author)rafununu2016-05-09

Yah It works with white LEDs Also

DIY Hacks and How Tos (author)2016-05-08

Great basic tester

thanks ! i am first time author ! hope i wish to continue writing

thanks for support

About This Instructable

1,728views

50favorites

License:

More by scitechindia:Easy LED Tester
Add instructable to: