loading

This is a stand that doesn't take long and can have lots of different purposes. I hope you enjoy it as much as I do.

Step 1: Introduction

Hello, today I will be telling you how to build a stand for any thing that you want to use it for. You can use it as a laptop stand a breakfast-in-bed tray or even a stool. This project is awesome, very quick and you can do it in a matter on minutes, the longest being 15 minutes.


Step 2: TOOLS

The tools you will need will be
-an 11" by 18" piece of wood followed by a 5 1/2" by 9" piece for the mouse stand or just an extra branch out

- For the legs, you will need two pieces of 10" by 6" piece of wood.

- 3 Medium screws

- 3 Large screws

- A drill

- and a saw to cut the wood.

Step 3: Putting It Together

Next you will take the top and drill three holes 2 1/2 inches apart and put the legs onto the top using the 6 screws and drill the pieces together.

After that, take the excess stand and flip over what you have and drill the three medium screws into the smaller piece approximately 1 1/2 inches apart.

After that, decorate it however you want and the first "I MADE IT" Gets a prize

About This Instructable

427views

16favorites

More by Cross612:Easy laptop, breakfast in bed, etc. stand. lined paper christmas bow 
Add instructable to: