With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here are instructions to make a simple marshmallow shooter that anyone can make with simple tools and PVC pipe.
Required: 1 Long section of 1/2" diameter PVC pipe. 2 T connecters 1 Pipe cutter 1 Nickel 1 Bag of mini marshmallows Use a pipecutter to cut the PV...
Place the nickel inside the bottom hole of one of the T connectors. This part will be where you place the handle of the gun and seals the barrels of ...
Insert the 4" PVC pipe to the bottom of the T connector where you placed the nickel.
Next, insert the 4" PCV pipe into the T connector. This is the middle part of the shooter barrel.
Then, insert the 2" PCV pipe (mouth piece) to the open end to the T connector.
Place the second T connector on the end of the mid barrel section. The T connector should have the middle hole facing up and tilted slightly to the l...
Insert a 4.5" section into the top of the T connector you just added. This is where you will load the marshmallows.
Add the last section of PVC pipe onto the T connector. The shooter is now complete and ready for marshmallow action.
Insert mini marshmallows into the ammo clip.
You are now ready for the marshmallow amageddon.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »