Easy Method for Custom T-Shirts

Step 4: Fill in the blanks: AWES_ME!

Now we just need to fill-in the outlined design. I find this step is easier with backlight turned off. For this design, I was able to make 3 t-shirts using only a single Sharpie marker.

Comments

[jsgraham]

Great instructable. A very effective technique I would like to add, and I've done this with T-Shirt painting for years.... If you place a sheet of inexpensive 150 or 200 grit sand paper between the T-Shirt and the backing board, it will give the T-Shirt fabric something to grab and keep it from drifting around while you fill in the blanks.

You can use spray adhesive on the back of the sand paper and mount it permanently to the backing board.