Introduction: Easy Paracord Key Fob

Sometimes you just need something to grab hold of your keys but struggle to get them out of your pocket you need something to grab on to and if you need you can unwind the string to use it in an emergency situation

Step 1: Supplies

Step 2: Preparing the Cord

you will need about 30 inches of Para cord melt both ends with a match or lighter so they wont unravel.

Step 3:

pull the Para cord onto the key ring as shown in the picture make sure both ends line up.

Step 4: Starting the Weave

the pictures explain everything

Step 5: Doing the Main Wrap

follow the steps

Step 6:

don't confuse this with the step before it looks similar but the cord that was going left I now going right the picture explain this much better. keep alternating with this step and the one before it.

Step 7:

After you are done glue the inside with a drop of super glue to keep it from pulling apart them cut the ends and melt them. Congratulations you are done.

Comments

author
supercoolcat (author)2016-02-08

Great I used it as zipper pull for my backpack

author
stalker145 (author)2016-02-07

I like to use this design for zipper pulls on jackets.

author
DIY Hacks and How Tos (author)2016-02-07

You never know when you might need a small piece of paracord.

About This Instructable

712views

20favorites

License:

More by supercoolcat:Servicing Vintage SprinklersDIY Smoke BombHow to Clean Slow T-v Remote
Add instructable to: