Easy Rainbow Band Bracelet With the Loom

PLEASE like and follow!!! Make sure your loom looks like the pictures!

Step 1: Materials

You will need:
A loom
A hook
Rainbow bands
Clips

Step 2: Beginning WITH a Loom

On the loom, place your first rubber band diagonally from left to right

Step 3:

Now place your next rubber band from the top of your first rubber band to the left diagonally

Step 4:

Repeat those steps until you reach the top of your loom

Step 5: LOOPING!

Now that you have placed your rubber bands, flip your loom so that(if your using the rainbow loom) the arrow is pointing at you

Step 6:

Now grab your hook and reach into the bottom rubber band. Then pull the bottom rubber band(it should look just like the picture)and loop it to the left diagonal peg

Step 7:

Now do the same to the other rubber bands until you reach the top of the loom

Step 8:

Now grab a clip and clip it on the top rubber band(the one above the arrow)

Step 9: Done!

Now pull the rubber bands off the loom and connect the clip to the other end of the rubber bands. And now your done!