With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here is an easy solar powered nightlight. Material List: 1/8" Baltic Birch Plywood Glue Solar Yard Light Tape (may need) (might also need scissors) ...
I designed my robot in CorelDRAW and used Boxit to 3-D the design. I used Boxit 4 times for the head, body, one leg and one arm. Then copied the one ...
Either laser cut or scroll saw design. Sand with 220 grit sand paper, electric sander will result in a smoother finish then hand sanding.
Layout pieces. Then glue only 5 of the six sides. (Do not glue opposite side of holes for the arms and legs, back of the main body and top of the hea...
You will need at least three washers, one lock washer, one nut and one bolt per joint. How this setup lays out: Head of bolt inside arm or leg, Washe...
Remove top of solar light. Line up solar cell with square hole in top of head. Glue top of solar light to top of head. Note: may need good quality tap...
Put Robbie together (I did not glue the 6th side on and the sides stay on just fine.) This solar light will charge under lamp light.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »