With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Say you make all kinds of things at your workbench and you have a need for taking high quality photos of everything that you do, well then you're in n...
The backdrop is constructed from: 60" length of 1/2" iron pipe with threaded ends 1/2" flange fittings 90 degree 1/2" elbow 6" length...
The backdrop is simply a roll of paper that's being sold as a photo backdrop. If you can find a roll of heavy bond printer paper for large format pri...
Assemble the elbows onto the long piece of pipe. Attach the 6" nipples, and then finally, screw on the flanges. Making things hand tight is fine.
Use denatured alcohol to take the oil finish off of the pipe. Otherwise, you'll touch the pipe, then touch the backdrop, and then ruin your nice whit...
Screw the pipe flanges into a surface. Either the wall, or the shelf above your workbench, or whatever works.
Unscrew the main pipe from the elbow fittings and slide the backdrop into place. Screw the main cross pipe back into position.
Use the spring clips to hold the paper roll in place and tightly wound when the backdrop is being store. Use the spring clips to clip the backdrop ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »