Print PDF
Favorite
Email
Step 3Wrap and secure
Wrap the plastic over the outside toward the middle of the rink and stagger the 1x2's over the top of the studs and secure with the 1.5 inch wood screws at each seam and every 16 inches or so.
Don't pull the plastic too tight... a little bit of slack (2 inches or so) on the bottom will help raise the rink to level it in the next step.
Start in the corner with the 4 foot piece first to stagger the seams to give it some more strength.
Don't pull the plastic too tight... a little bit of slack (2 inches or so) on the bottom will help raise the rink to level it in the next step.
Start in the corner with the 4 foot piece first to stagger the seams to give it some more strength.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
