Print PDF
Favorite
Email
Step 3Closer view of scooter wheel
We need two of these assemblies.
There is a threaded rod running through entire wheel. There is a tubular sleeve each side, one is short and one is long. The nuts each end clamp tubes to bearing in wheel so everything locks up tight (bearing can still spin though).
There is a threaded rod running through entire wheel. There is a tubular sleeve each side, one is short and one is long. The nuts each end clamp tubes to bearing in wheel so everything locks up tight (bearing can still spin though).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
