Introduction: Easy Connectable Hooks.

Picture of Easy Connectable Hooks.

Required items- (1) metal wire or rod. (2)cutting plier.

Step 1: Take Two Straight Metal Wire or Thin Rod of Equal Length.

Picture of Take Two Straight Metal Wire or Thin Rod of Equal Length.

Can be done even using a thin metal rod.

Step 2: Bend Both the Wire Into V-shape.

Picture of Bend Both the Wire Into V-shape.

Step 3: Bend Into a V-shape at Both End of the Wire.

Picture of Bend Into a V-shape at Both End of the Wire.

Step 4: Now It Is Ready to Be Used.

Picture of Now It Is Ready to Be Used.

At the long bent end where my fingers can seen a rope can be attached or a loop can be made to attach one hook to the other ta makee a chain link.

Comments

Wired_Mist (author)2015-07-04

Neat Design; Nice Job !

About This Instructable

567views

13favorites

License:

More by Skullcustoms:Easy attachable hooks.Mini prototype shockabsorber.Easy connectable hooks.
Add instructable to: