Print PDF
Favorite
Email
Step 4Install fan standoffs
Put the long screws through the fan first, then slide the tubes on.
If you need to, use a sheet metal screw smaller than your main screws to punch the can easier.
Or predrill with a small drill bit. Or make holes with hammer and nail. It's up to you.
If you need to, use a sheet metal screw smaller than your main screws to punch the can easier.
Or predrill with a small drill bit. Or make holes with hammer and nail. It's up to you.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
