The unit of work gives a very good impression, inflames the imagination and raises the general atmosphere.
Of course, from yours video creations depends on most. If you have the minimum skills in dealing with vector programs or video creations you work with AVI and other video formats, then you can try in the programming of the LED pixels on your way... Programs of LED producers have to use, but only as a translator of your animation or video file.
Step 1: Mounting LED pixels
Pixels are usually planned for installation in 12mm hole.
I set the pixels in the 5 columns by 10 rows. It is important to hold the default order pixels. This order will make later in the program for programming LED.
When you mount the pixels, connect them to the output of the SD controller, connecting the pixels to the power supply 5V 3.5A (per pixel is required 60mA current, mean total consumption is 3A). Power is always good to take zza 30 to 50% stronger than the actual value needed.