Print PDF
Favorite
Email
Step 5Making the foot switch / pedal
Then, you have to install the arcade switch in some kind of support. I used an old AMD processor cardboard box, very sturdy and lightweight.
1) Cut a hole in the box
2) Remove the black switch of the button and screw down the yellow casing
3) Tighten the yellow button with the plastic black nut
4) Solder cable to the ends of the switch
5) Attach the switch again to the arcade button and close the box
1) Cut a hole in the box
2) Remove the black switch of the button and screw down the yellow casing
3) Tighten the yellow button with the plastic black nut
4) Solder cable to the ends of the switch
5) Attach the switch again to the arcade button and close the box
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
