With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
At the height of the rubber band craze, my son decided that he wanted a loom too. Well, at the time, there were none to be found. So ...
I used a chunk of wood that I had lying around (1.5" X .75" X 6"); however just about any size will do; six pushpins, a pencil, and a ...
Find the center ,use your drill bit and Drill and make a hole.
With my pencil I marked where I wanted to place the pins. I didn't measure them out, I just eyeballed this.
Push the pins on your dots. You might need a hammer to put them all the way in.
For this bracelet ,we used 25 of each color; Yellow, Brown and Light Blue; a crochet hook and the loom we just put together.
We started with yellow. We put the first band in a triangle pointing up, using three of the pins . Then place the second band, of the same color, ...
To put it all together. What I tell the kids to do is pick a pin and take that loop and move it to the opposite side. Do ...
This loom can be used with two posts, four posts, or all six. Try different Patterns and different styles. I've also used yarn on this. Haven't found a practical ...
Thought you might like to see The first loom that I made.
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.