Introduction: Easy to Make and Useful Gopro Handle
We will make a nice looking and useful gopro handle using a cardbox sealer.
Things you may need:
A dremel or a drill
a spare gopro joint
a cardbox sealer
screw that fits gopro standard holes
First we are dismantling the sealer and removing the spring and metal set in middle.
Now we can start assembling the handle, I did not have thin screw set so had to use a drill to adjust gopro joints' holes.
here we go, a nice handle is ready to use... the empty space behind cam can be used to attach the wifi remote.
We have a be nice policy.
Please be positive and constructive.