Print PDF
Favorite
Email
Step 3Prepare the super-parabolic-wave-bouncer =)
1- Roll two metal sheets like in the first picture. These will hold the pipe and the "bouncer" together
2- Use duct tape to put fasten them to the sheet. Cover the upside part of the hole created by the holder that will be on top. That way your pipe won't come out there and your antenna will stay in place.
3- to glue the aluminium paper to the sheet i did like this: first put some tape along the sheet with the adhesive side facing up
4- secure these with some tape across like in the fourth pic
2- Use duct tape to put fasten them to the sheet. Cover the upside part of the hole created by the holder that will be on top. That way your pipe won't come out there and your antenna will stay in place.
3- to glue the aluminium paper to the sheet i did like this: first put some tape along the sheet with the adhesive side facing up
4- secure these with some tape across like in the fourth pic
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
