Introduction: Easy Way to Make a DIY Cintiq Part 4/4

Last in the DIY Cintiq with Intuos4 Large series.  There's a demo at the end.

Comments

artobot (author)2011-11-25

Hmm, any calibration issues?

DoSho (author)artobot2011-11-25

Not particularly. You use the wacom driver and get reasonable accuracy with a little drift at the far right and left depending on how you like or don't like your cursor offset.

bennylee (author)2011-03-08

ok what i dont understand is... and this isnt criticism. why have you gone through all this effort to make something that looks very professional and then just used tape to hold the electronics in place??? use some actual fixings!

DoSho (author)bennylee2011-03-08

Update here http://www.youtube.com/watch?v=iYwsFiVbHi8 :o)

agis68 (author)2010-10-25

excellent job
nice and clear
very professional 5*

About This Instructable

4,687views

10favorites

More by DoSho:Amazon warrior Part 3 in ZBrush3.5Amazon warrior Part 2 in ZBrush3.5WIP - 3D Total "The Lost Jungle" Entry
Add instructable to: